Description
Threaded plug Inserts for 10mm kits for use with Handle Anything Closed End System
#PKHASET1.
To use, press the threaded plug into one end of a 10mm kit tube and drill a blind hole with a 10mm drill bit to the correct depth to accomodate the entire length of the tube and plug. Glue Tube with Plug into the blank and allow to cure.
Thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod along with bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.
